Food Grade Cationic Polyacrylamide CPAM Water Soluble Cationic Pam

Cationic Polyacrylamide CPAM sewage water treatment 

Description Of Cationic Polyacrylamide CPAM :

Cationic Polyacrylamide CPAM is a hard glassy solid at room temperature. Products are glue, latex and white powder, translucent
Beads and flakes, etc. Good thermal stability. It can be dissolved in water in any proportion, and the aqueous solution is a uniform and transparent liquid.
After long-term storage, the viscosity of the solution will decrease due to the slow degradation of the polymer, especially when the storage and transportation conditions are poor.
For obvious. Polyacrylamide is used as a lubricant, suspending agent, clay stabilizer, oil-displacing agent, fluid loss agent and increasing agent.
The thickener has been widely used in drilling, acidification, fracturing, water plugging, cementing, secondary oil recovery and tertiary oil recovery.
It is an extremely important oil field chemical.

Technical Index

Package: Inner package : Plastic PE film; Outer package: woven bag , N.W 25KG/BAG

Storage: Stored in a dry cool and ventilate place, it will keep good for 2 years.

Application of Polyacrylamide Flocculant :

 

1) For sludge dewatering, the corresponding model of this product can be selected according to the nature of the sludge.
The sludge is dewatered before entering the filter press. When dewatering, the flocs are large, the filter cloth is not sticky, and it does not disperse during the filter press
The mud cake is thicker, the dehydration efficiency is high, and the water content of the mud cake is below 80%.
2) It is used for the treatment of domestic sewage and organic waste water. This product is positive in the formulation or alkaline medium.
Electricity, in this way, flocculate and sediment the negatively charged sewage with suspended particles in the sewage
Such as the production of grain alcohol wastewater, papermaking wastewater, wastewater from urban sewage treatment plants, beer wastewater,
Monosodium glutamate factory wastewater, sugar wastewater, wastewater with high organic content, feed wastewater, textile printing and dyeing wastewater, etc.,
Cationic polyacrylamide is more effective than anionic, non-ionic polyacrylamide or inorganic salts.
Several times or tens of times higher, because this kind of waste water is generally negatively charged.
3) Flocculant used for the treatment of tap water with river water as the water source, with low dosage, good effect and low cost
In particular, it has a good effect when combined with inorganic flocculants. It will become
Flocculant for waterworks in the river basin.

4) Strengthening agent and other auxiliary agents for papermaking. Improve the retention rate of fillers, pigments, etc., and the strength of paper.