Cas No 9003-05-8 Cationic Polyacrylamide CPAM Water Treatment White Granule

Cas No 9003-05-8 Cationic Polyacrylamide CPAM Water Treatment White Granule

Description Of Cationic Polyacrylamide CPAM :

Cationic polyacrylamide (CPAM) appearance is white powder, is a linear polymer compound, because it has a variety of active groups, and many substances can be affinity, adsorption form hydrogen bonds.Molecular weights range from 8 million to 12 million.Ionic degree from 20% to 55% water solubility, can be dissolved in water in any proportion and insoluble in organic solvents.Effective pH range of 1 to 14, high polymer electrolyte characteristics, suitable for negative charge and rich in organic waste water treatment.

Package: Inner package : Plastic PE film; Outer package: woven bag , N.W 25KG/BAG

Storage: Stored in a dry cool and ventilate place, it will keep good for 2 years.

Technical Index

ITEM NO.	Molecular weight (in million)		Solid content %	PH Value	Monomer residual %
8150	12		≥89	5-14	≤0.05
8158	10
8157	9
8156	8
8155	7
8154	6
8153	5

Application of Polyacrylamide Flocculant :

 

1) For sludge dewatering, the corresponding model of this product can be selected according to the nature of the sludge.
The sludge is dewatered before entering the filter press. When dewatering, the flocs are large, the filter cloth is not sticky, and it does not disperse during the filter press
The mud cake is thicker, the dehydration efficiency is high, and the water content of the mud cake is below 80%.
 

2) It is used for the treatment of domestic sewage and organic waste water. This product is positive in the formulation or alkaline medium.
Electricity, in this way, flocculate and sediment the negatively charged sewage with suspended particles in the sewage
Such as the production of grain alcohol wastewater, papermaking wastewater, wastewater from urban sewage treatment plants, beer wastewater,
Monosodium glutamate factory wastewater, sugar wastewater, wastewater with high organic content, feed wastewater, textile printing and dyeing wastewater, etc.,
Cationic polyacrylamide is more effective than anionic, non-ionic polyacrylamide or inorganic salts.
Several times or tens of times higher, because this kind of waste water is generally negatively charged.
 

3) Flocculant used for the treatment of tap water with river water as the water source, with low dosage, good effect and low cost
In particular, it has a good effect when combined with inorganic flocculants. It will become
Flocculant for waterworks in the river basin.
 

4) Strengthening agent and other auxiliary agents for papermaking. Improve the retention rate of fillers, pigments, etc., and the strength of paper.

 

Method of application:

The product is prepared into 0.05%-0.20% aqueous solution, in the dissolution of the product evenly and slowly sprinkled into the mixing measures of the container, in order to avoid the agglomeration is not easy to dissolve;General solid product dissolution time for 30-60 minutes can be used;The dissolved solution is added to the sewage or sludge to be treated for stirring and mixing to produce a flocculating state.