Product Details:
|
Product Name: | Polyacrylamide PAM | Color: | White |
---|---|---|---|
Appearance: | Powder | Package: | 25kg/bag, Or Customized |
Grade: | Food Grade, Industrial Grade | Application: | Industrial And Hosehold Wastewater Treatment |
Molecular Weight: | 14 Million - 18 Million | Purity: | 100% |
High Light: | Anionic Polyacrylamide APAM For Sand Washing,14 million Anionic Polyacrylamide APAM,Sand Washing Anionic Polyacrylamide APAM |
14 Million Anionic PAM Chemical Water Treatment Flocculant For Sand Washing Waswater
Introduction to PAM Chemical Water Treatment
The daily production of the sand washing plant will produce a large amount of sewage, which contains a large amount of sediment and suspended impurities, and the turbidity of the sand washing sewage is high. Polyacrylamide PAM is a special flocculant for treating sand washing wastewater. It is difficult to meet the daily production needs by natural precipitation, but direct discharge without treatment will cause environmental pollution and have a great impact on environmental protection. Therefore, the sand waste water must be properly treated. The treated waste water can not only be recycled, but also the sediment generated after treatment can be landfilled after being treated by the filter press without causing pollution.
Package: Inner package: Plastic PE film; outer package: woven bag, N.W. 25 kg/bag
Storage: Stored in a dry cool and ventilate place, it will keep good for 2 years
Technical index of PAM Chemical Water Treatment
Cationic Polyacrylamide | |
Appearance | White powder |
Solid content (%) | ≥88 |
Molecular weight (millions) | 5-12 |
Degree of ion (%) | Low middle height |
Dissolution time (min) | ≤60 |
Anionic Polyacrylamide | |
Appearance | White Powder |
Solid content (%) | ≥88 |
Molecular weight (millions) | 12-25 |
Degree of ion (%) | Low middle height |
Dissolution time (min) | ≤60 |
Nonionic Polyacrylamide | |
Appearance | White Powder |
Solid content (%) | ≥88 |
Molecular weight (millions) | 8-12 |
Impurity (%) | ≤5 |
Dissolution time (min) | ≤60 |
Application of PAM Chemical Water Treatment:
1. Polyacrylamide can't be put directlry into sewage, so dissolve in water before using Polyacrylamide.
2. The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher
than five degress Celsius. Otherwise it will be dissolve very slowly. Temperature above 40 degrees Celsius affect the use effect.
3. Notice: Don't use strong acid, strong base, high salt water preparation.
4. The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
5. If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse.
6. The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide
should be strict for about 2 hours.
7. The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours.
Instructions of PAM Chemical Water Treatment:
1. When using the product, it is important to disperse the product in water, otherwise it will cause polyacrylamide caking and produce "fisheye", and the dissolution time will increase.
2. When the product is dissolved, the water with low hardness is required.
The dissolving tank is free from materials that can easily affect the water quality.
3, the use of warm water can speed up the dissolution rate, but the temperature is too high, will lead to thermal degradation of molecular chains, viscosity will be affected, the general water temperature can not exceed 50℃.
4, the use of stirring is conducive to dissolution, but too violent stirring will make the polymer long chain fracture and degradation, the agitator adopts the ship propulsion type, the speed of 200-500rpm.
5, under normal circumstances, the first polyacrylamide dissolved into 0.05%-0.5% standby.
6, polyacrylamide dosage is different according to the use of different.
Effect of wastewater treatment by PAM Chemical Water Treatment:
Contact Person: nicoleli
Tel: +8613313815128